The 10 Best Chain Saw Offers in UK - June 2026

A dull chain saw can be a major inconvenience for anyone who needs to cut wood or trim trees. Sharpening a chain saw is a relatively easy process, but it requires a bit of skill and a few tools. In this article, we will explain how to sharpen a chain saw in six easy steps.

First, you will need to gather a few essential tools. You will need a round file that matches the size of the teeth on your chain saw, a depth gauge tool, and a flat file. You will also need a vice to secure the chain saw while you work on it. Before you begin, make sure your chain saw is clean and free of any debris.

Next, loosen the chain tension by using the appropriate tool to loosen the nuts or screws that hold the guide bar in place. Once the tension is released, remove the chain and clamp the guide bar in the vice. Make sure the bar is securely fastened and won't move around while you work on it.

Use the depth gauge tool to measure the depth of each tooth on the chain. This tool will ensure that you file each tooth to the correct depth. Once you have measured the depth of each tooth, you can begin sharpening the teeth one by one using the round file. Hold the file at the same angle as the cutting edge and file each tooth from the inside to the outside, using smooth, even strokes. Repeat the process for each tooth on the chain.

After you have sharpened all the teeth on the chain, use the flat file to smooth any burrs or rough spots on the top of the tooth. This will make the chain saw cut more smoothly and reduce the risk of kickback. Once you have finished filing, check the depth of each tooth with the depth gauge tool again to make sure that they are all at the correct depth.

Finally, reinstall the chain on the guide bar, making sure that the cutting teeth are facing forward and the chain is properly tensioned. Start your chain saw and test it by making a few cuts. If everything is working correctly, your chain saw should cut smoothly and easily through the wood.

Sharpening a chain saw is not a difficult task, but it is essential for maintaining the tool's performance and safety. By following the steps outlined in this article, you can ensure that your chain saw is always ready when you need it.

Starting a chainsaw can be intimidating, especially for those who are new to the tool. However, with a few simple steps, anyone can start a chainsaw and get to work. In this guide, we'll walk you through the process of starting a chainsaw in six easy steps.

Step 1: Check the fuel and oil levels

Before starting your chainsaw, it's important to check the fuel and oil levels. You should always use fresh gasoline and a high-quality two-stroke oil to ensure your chainsaw is running at its best. Make sure you have enough fuel and oil for the job ahead, and top up if necessary.

Step 2: Set the chainsaw on a flat surface

Next, place the chainsaw on a flat surface, such as the ground, a bench, or a sawhorse. This will help ensure the chainsaw is stable and won't tip over while you're starting it.

Step 3: Engage the chain brake

Before starting the chainsaw, you'll need to engage the chain brake. This will stop the chain from moving while you're starting the engine, making it safer for you to work with. To engage the chain brake, simply push the brake handle forward until it clicks.

Step 4: Prime the engine

To prime the engine, locate the primer bulb on your chainsaw. Press the bulb several times until you see fuel moving through the clear fuel lines. This will help the engine start more easily and ensure a smoother running engine.

Step 5: Pull the starter cord

With your chainsaw primed and the chain brake engaged, you're now ready to start the engine. Hold the handle firmly with one hand and pull the starter cord with the other. Give a strong, steady pull, and the engine should start up quickly.

Step 6: Disengage the chain brake and begin cutting

Finally, disengage the chain brake by pulling back on the brake handle. The chain should now be able to move freely. Take a moment to ensure you have a firm grip on the chainsaw, and then you're ready to begin cutting.

With these simple steps, you'll be able to start your chainsaw quickly and safely. Remember to always wear appropriate safety gear, including eye and ear protection, and to follow all manufacturer guidelines for your specific chainsaw model. Happy cutting!

Cutting down a tree can be a challenging and dangerous task, especially if you don't have the right tools and knowledge. A chainsaw can make the job easier, but it's important to know how to use it safely and effectively. Here are some steps to follow when cutting down a tree with a chainsaw.

1. Assess the tree and area around it. Before you start cutting, make sure the tree is not too close to buildings, power lines, or other obstacles. Identify the direction in which the tree should fall and make sure there is enough space for it to do so safely.

2. Plan your cuts. You should start by making a horizontal cut on the side of the tree where you want it to fall. This cut should be about one-third of the way through the tree. Then make a second cut at a 45-degree angle above the first cut, going in towards the center of the tree. Stop cutting when this second cut meets the first one.

3. Make the final cut. This should be made on the opposite side of the tree, slightly above the bottom of the horizontal cut you made in step 2. This cut should be made straight through the tree, and it will cause the tree to fall in the direction of your first two cuts.

4. Remove any remaining branches. Once the tree is on the ground, you can use your chainsaw to remove any branches that are still attached. Be careful not to damage the chains or bar with any dirt or debris that may be on the branches.

5. Cut the trunk into sections. Depending on the size of the tree, you may need to cut the trunk into smaller sections to make it easier to move. Use your chainsaw to make straight, even cuts through the trunk. Be sure to wear gloves and eye protection throughout this process.

6. Clean up debris. Once you have removed all the tree sections, you should clean up any debris left on the ground. This may include branches, leaves, and small pieces of wood. A leaf blower or rake can be helpful for this task.

In summary, cutting down a tree with a chainsaw can be a challenging task that requires careful planning and execution. By following these steps and always prioritizing safety, you can make the job easier and ensure that you achieve the desired result. Remember to wear protective gear, including eye and ear protection, and to always keep the chainsaw blade sharp and in good condition.

A chainsaw chain needs to be replaced when it becomes dull or damaged. It is important to replace the chain as soon as possible to prevent further damage to your chainsaw and potential injury to yourself.

The first step in replacing a chainsaw chain is to turn off the chainsaw and remove the old chain. This can be done by loosening the chain tensioner and lifting the old chain off the bar. Be careful not to touch the sharp teeth of the chain.

Once the old chain is removed, it is time to install the new chain. Make sure that the new chain is the correct size for your chainsaw and has the correct number of teeth. Next, loop the chain around the sprocket and lay it on the bar, making sure that the cutting teeth are facing the correct direction.

To tighten the new chain, use the chain tensioner to adjust the tension until the chain is snug against the bar. Be careful not to overtighten the chain as this can cause it to break.

Finally, check the chain tension regularly and adjust as necessary. A loose chain can be dangerous and cause kickback, which can result in serious injury. It is also important to regularly sharpen your chainsaw chain to ensure optimal performance and safety.

In conclusion, replacing a chainsaw chain is a relatively simple process that can be done at home with the right tools and knowledge. Remember to always prioritize safety and take the necessary precautions to prevent injury. Regular maintenance and care of your chainsaw can extend its lifespan and ensure optimal performance.

Chainsaws are a powerful tool that can be used for a variety of tasks. However, to ensure that they are operating safely and efficiently, it is important to maintain them regularly. One of the critical aspects of chainsaw maintenance is chain tension. The chain needs to be properly adjusted to ensure safe operation.

To adjust the chain tension on a chainsaw, first, ensure that the engine is turned off and that the chainsaw is disconnected from the power source. Next, locate the chain adjuster screw, which is usually found at the side of the chainsaw. Turn the screw clockwise to tighten the chain and counterclockwise to loosen it.

When adjusting the chain tension, keep in mind that the chain should be snug against the bar but still able to move freely. If the chain is too tight, it can cause damage to the bar and chain. On the other hand, if the chain is too loose, it can come off the bar or cause kickback, which can be dangerous.

To determine if the chain tension is correct, pull the chain away from the bar in the middle of the bar and check the gap between the chain and the bar. The gap should be minimal, ideally no more than 1/8 inch. If the gap is too large, the chain is too loose and needs to be adjusted.

When adjusting the chain tension, make sure to wear protective gloves and safety goggles to prevent injury from the sharp chain. Keep in mind that it may take some trial and error to achieve the right tension, so be patient and take your time.

In summary, adjusting chain tension is an essential part of maintaining a chainsaw. By following these steps and ensuring that the chain is snug but not too tight or loose, you can improve the safety and efficiency of your tool. Remember always to wear protective gear and work cautiously to avoid injury.

Mixing fuel for a chainsaw is an important task that all chainsaw users should know how to do. Chainsaws require a specific blend of gasoline and oil to run efficiently and effectively. The correct fuel mixture can ensure that your chainsaw runs smoothly and lasts longer. In this article, we will provide you with step-by-step instructions on how to mix fuel for a chainsaw.

The first step in mixing fuel for a chainsaw is to determine the correct fuel ratio. The fuel ratio is the amount of gasoline to oil that is required for your chainsaw to run effectively. Most chainsaws require a 50:1 fuel ratio, which means 50 parts gasoline to 1 part oil. However, it is important to check your chainsaw owner's manual to determine the correct fuel ratio for your specific chainsaw.

Once you have determined the correct fuel ratio, you can begin mixing the fuel. To mix the fuel, you will need to gather the necessary materials, including a clean container, gasoline, and two-cycle oil. It is important to use only high-quality gasoline and two-cycle oil to ensure that your chainsaw runs smoothly.

Next, pour the required amount of gasoline into the clean container. Then, add the correct amount of two-cycle oil to the gasoline. It is important to measure the oil accurately to ensure that the fuel mixture is correct. Once the oil has been added to the gasoline, screw the lid onto the container and shake the container vigorously to mix the fuel.

After the fuel has been mixed, it is important to label the container with the fuel mixture ratio and the date mixed. This will ensure that you know the correct fuel ratio for future use and that the fuel does not expire.

In conclusion, mixing fuel for a chainsaw is a simple task that can have a big impact on the performance and longevity of your chainsaw. By following these step-by-step instructions, you can ensure that your chainsaw runs smoothly and effectively every time you use it. Remember to always check your chainsaw owner's manual for the correct fuel ratio and to use high-quality gasoline and two-cycle oil.

A chainsaw is a powerful and versatile tool that can make quick work of tree branches and firewood. However, like any other tool, it requires regular maintenance to function at its best. Keeping your chainsaw clean is an essential part of its maintenance routine. Dirt, sawdust, and oil residue can build up on the chainsaw over time, leading to reduced performance and potentially damaging the engine. In this article, we will take a look at some tips on how to clean a chainsaw effectively.

The first step in cleaning your chainsaw is to make sure it is switched off and disconnected from any power source. It is also essential to wear protective gloves and eye goggles to prevent any injury. Use a stiff bristle brush to remove any dirt and sawdust from the chainsaw's external parts, including the air filter cover, guide bar, and chain. You can also use a compressed air canister to blow the dirt away from hard-to-reach areas.

Next, remove the chain and guide bar from the chainsaw and place them in a container filled with a degreaser solution. Leave them to soak for a few hours, and then use a nylon brush to remove any remaining dirt and grease. Afterward, rinse them with clean water and leave them to dry before reattaching them to the chainsaw.

The air filter is another crucial component that requires regular cleaning. Remove the air filter cover and take out the air filter. Use a soft brush or compressed air canister to remove any dirt and debris from the filter. You can also wash the filter with warm, soapy water and then leave it to dry before reinstalling it back into the chainsaw.

Finally, clean the chainsaw's engine by wiping it down with a rag moistened with a mild cleaning solution. Make sure to clean the muffler, fuel tank, and carburetor as well. Once you are done, reassemble the chainsaw and check that it is properly lubricated before using it again.

In conclusion, cleaning your chainsaw regularly will extend its lifespan and keep it running smoothly. Follow the tips outlined above, and your chainsaw will be in top shape for years to come. Remember to always wear appropriate protective gear and never attempt to clean your chainsaw while it is running or connected to a power source.

Choosing the right chainsaw chain can be a challenging task, especially if you’re not familiar with the different types of chainsaw chains available in the market. A chainsaw chain is a crucial component of your chainsaw, and it's essential to choose the right one that suits your cutting needs. In this article, we’ll discuss some essential factors to consider when choosing the right chainsaw chain.

The first factor to consider when choosing a chainsaw chain is the pitch. The pitch refers to the distance between the links on the chain, and it's crucial to choose the right pitch that matches the chainsaw bar. If you select the wrong pitch, it won't fit perfectly on the chainsaw bar, and this can lead to a decreased cutting performance or even damage to your chainsaw. Therefore, it’s essential to check your chainsaw bar’s specifications before purchasing a chainsaw chain to ensure you choose the correct pitch.

Another factor to consider when selecting a chainsaw chain is the gauge. The gauge refers to the thickness of the drive links on the chainsaw chain, and it's another crucial factor to consider when choosing the right chainsaw chain. Just like the pitch, it's vital to select the right gauge that matches the chainsaw bar. If the gauge is too thick or thin, it won't fit correctly, leading to poor performance or even damage to your chainsaw.

The length of the chainsaw chain is also an essential consideration to make when selecting the right chainsaw chain. The length refers to the number of drive links on the chainsaw chain, and it's essential to choose the right length that matches your chainsaw bar's size. If you choose a chain that's too short, it won't fit on the bar, and if it's too long, it will overhang from the chainsaw bar, which can be dangerous and lead to poor cutting performance.

The final factor to consider when selecting the right chainsaw chain is the type of chain. Chainsaw chains come in different types, including full chisel chains, semi-chisel chains, and low-profile chains. The type of chain you choose will depend on your cutting needs. For instance, full chisel chains are ideal for cutting hardwoods, while semi-chisel chains are better suited for softwoods. Low-profile chains are ideal for light-duty cutting tasks, and they're also suitable for beginners.

In conclusion, selecting the right chainsaw chain is crucial for maintaining the performance of your chainsaw and ensuring you get the best cutting results. When selecting the right chainsaw chain, it's crucial to consider the pitch, gauge, length, and type of chain. By considering these factors, you'll be able to choose the perfect chainsaw chain that matches your cutting needs.

A chainsaw is an important tool for anyone who works with wood. Whether you're a professional or an amateur, you need to know how to maintain your chainsaw if you want it to perform efficiently and last for a long time. Here are some tips on how to keep your chainsaw in top condition.

Firstly, you need to regularly clean your chainsaw. After every use, take a brush and remove any sawdust, dirt, or debris that might have accumulated on it. Then, use a damp cloth to wipe the chain, bar, and air filter to get rid of any stubborn stains or grease. Furthermore, make sure that the chainsaw is completely dry before storing it.

Secondly, you need to keep the chain sharp. A blunt chain can significantly reduce the performance of your chainsaw. Thus, you need to sharpen it regularly or replace it if it's too worn out. To sharpen the chain, you can use a chainsaw filing kit or take it to a professional technician for servicing. However, if you opt to sharpen it yourself, make sure to follow all safety guidelines.

Thirdly, you need to routinely lubricate the chainsaw. Chainsaws are designed to work best when they are well-oiled. Thus, regularly lubricate the bar and chain to minimize the chances of wear and tear. Using a quality bar and chain oil will prevent the chain from overheating, which can cause damage to the chainsaw.

Fourthly, you need to inspect the chainsaw's spark plug and air filter. The spark plug should be cleaned or replaced at least once every year, and the air filter should be cleaned or replaced every three months. You can clean the air filter with warm soapy water and leave it to dry before reinserting it.

Lastly, you need to store your chainsaw properly. After completing all the maintenance processes, keep the chainsaw in a dry and secure place to avoid rusting and damage. Furthermore, don't store it with the gasoline or oil tank full as it might leak or spill, which is potentially hazardous.

In conclusion, maintaining a chainsaw is important to keep it in good working condition. By regularly cleaning, sharpening, lubricating, inspecting, and storing it, you're increasing your productivity, maximizing its lifespan, and most importantly, keeping yourself safe.

Using a chainsaw is a great way to complete tasks such as cutting trees and trimming branches. However, safety is of utmost importance while using one. Whether you're a professional or a homeowner, it is essential to know the correct way to use a saw to avoid injury. In this article, we will discuss some guidelines that can help you safely use a chainsaw.

Firstly, it's important to ensure that you have the right safety gear, including a helmet, eye and ear protection, gloves, and sturdy work boots. Once you have all of these in place, you should thoroughly inspect the chainsaw itself before you start it. Check the chain brake, trigger, throttle lockout, and other safety features to ensure that they work correctly.

Before you start cutting with the chainsaw, make sure that the area around you is clear of any obstructions and people. Maintain a safe distance from the cutting area and be aware of any hazards such as uneven ground or power lines. Always hold the saw with both hands, firmly gripping the handles.

When using a chainsaw, it is crucial to keep the blade away from your body and limbs. Try to maintain your footing and keep the saw steady while you work. Never cut above shoulder height or from a ladder or other unstable surface. Do not force the saw through the wood; instead, let the tool do the work and avoid using it in an uncontrolled manner.

Finally, it is essential to take regular breaks while using the saw. This can help combat fatigue and ensure that you remain alert while operating the equipment. If you feel tired or dizzy, it's time to take a rest and come back to the job later.

In conclusion, working with a chainsaw requires a lot of attention, care, and safety precautions. With the right safety gear, thorough inspection of the equipment, and mindful use, you can operate the machinery safely and efficiently. Keep the above tips in mind next time you use a chainsaw to ensure that you remain unharmed while completing your tasks.